Filter by Category
Filter by Author
I have experimented very much with photogrammetry and got exciting results. This article talks about this experience. These experiments were done together with Andalú Sea and my friend Juan Soler. During underwater operations, we always record videos of the whole process just in case of problems and for documentation purposes. We checked a sewage outfall […]
In my last post, “Alioli ROV Boards“, I described most of the hardware I use to build Alioli ROV and how I plan to use it. In this post, I show how the UAV submarine hardware and electronics interconnect with each other and the boards I have built for that purpose: the engines, driver, board, […]
In my last post, “Get your hardware for Arduino Underwater ROV”, I described most of the hardware I use to build Alioli ROV and how I plan to use it. In this post, I will show how the hardware interconnects with each other and the boards I have built. During the process of building Alioli […]
In my last post, “Finishing the frame for an Underwater ROV”, I gave all details about the design I used to build the frame for Alioli Underwater ROV. In this post, I will show what hardware I will use and how to use it. Until now, I have been looking to get together and control […]
In my last post, “How I designed the frame for my Underwater ROV“, I gave all details about the design I used for the frame for Alioli Underwater ROV. In this post, I show what I did to build my submarine frame. To get everything together, I put screws in all junctions, as shown in […]
In my last post, “Underwater Alioli ROV“, I shared all the information I got from the Internet to build my Underwater ROV. In this post, I will explain how I made the frame. The main thing the ROV needs to become real is a frame, something to rest on. After checking several designs from different […]
This time I have decided to write this article in English because I have been able to get a lot of information. Thanks to that, most of the information I found to help me with this project was in English. A long time ago, I tried scuba diving, and after some time, I decided to […]
🇬🇧 Read it in English, “GenCreate, GenUpdate, GenDetail and GenDelete“ En el último artículo describíamos Codenerix GenList para comenzar a usar los listados de CODENERIX. Ha llegado el momento de ver como crear, ver, actualizar y borrar la información de esos listados. En este artículo hablaré sobre GenCreate, GenDetail, GenUpdate y GenDelete. En primer lugar cabe decir que cada uno […]
🇬🇧 Read it in English, “GenList“ Anteriormente hablábamos sobre CodenerixModel para entender como se construye un modelo funcional con CODENERIX. Sin embargo, para que todo funciocune en Django, además de los modelos también hay que definir las vistas. Para permitir visualizar los contenidos webs existen a disposición del programador un conjunto de vistas heredables, todas ellas basadas […]
🇬🇧 Read it in English, “CodenerixModel“ En el artículo anterior hablábamos sobre CODENERIX y sus bondades. Ahora vamos a comenzar una serie de artículos que permitan profundizar en esta tecnología. Para que todo proyecto Django pueda soportar CODENERIX adecuadamente es necesario dar algunos pasos importantes que aseguren el buen comienzo del proyecto. No voy a repetir que la forma […]
